Storm Damage Electrical Repair in Plantation

After a hurricane or severe tropical storm passes through Plantation and Broward County, electrical damage assessment should be one of your first priorities — but safety must come first. Never enter a flooded area where electrical equipment may be submerged. If your home has standing water and you have not been able to shut off the main breaker, do not enter until an electrician or the fire department has cleared the space.

Common electrical storm damage includes: damaged or displaced service entrance cables (the thick wires running from FPL (Florida Power & Light) pole to your home's weatherhead), water intrusion into the main electrical panel, damaged or displaced the electric meter base, fallen trees that have pulled down overhead service drops, and lightning-induced damage to panels, breakers, and connected appliances.

Exterior signs of damage to check from a safe distance: Is your service entrance cable still connected and intact from the utility pole to your weatherhead? Is the meter still in its socket? Is there visible damage to the weatherhead or mast on your roof? Are there any downed wires near your property? If you see downed power lines, stay at least 35 feet away and call FPL immediately at 1-800-4-OUTAGE.

Storm damage electrical repairs follow a specific sequence that differs from routine electrical work. The first step is always a safety assessment — our electrician evaluates the extent of damage before any power is restored to ensure that energizing circuits will not create additional hazards such as electrical fires from water-damaged wiring or shocks from compromised insulation.

If the service entrance is damaged, FPL (Florida Power & Light) must de-energize the transformer and disconnect service before repairs can begin. Our team repairs or replaces the weatherhead, mast, service entrance cable, and meter base as needed. Once the service entrance is restored, a municipal electrical inspector must approve the repair before FPL will reconnect service — this is a mandatory step that cannot be bypassed.

For internal damage — water-damaged panels, tripped breakers that won't reset, damaged outlets and wiring — our team performs circuit-by-circuit testing using insulation resistance testing (megohmmeter) to identify compromised wiring. Circuits that have been submerged in flood water must be replaced per NEC requirements, as the insulation's integrity cannot be guaranteed even after drying.

Proper documentation is critical for successful insurance claims on electrical storm damage. Before any repairs begin, photograph all visible damage: the service entrance, the panel (inside and outside), any water damage marks, damaged outlets and fixtures, and the surrounding area showing the storm's impact.

Your electrician should provide a detailed written assessment that includes: the specific damage found, the cause of the damage (wind, water intrusion, lightning, fallen debris), which components need repair versus replacement, and the estimated cost of restoration. This documentation becomes supporting evidence for your insurance claim.

Most Florida homeowner's policies cover electrical damage caused by named storms and lightning strikes, but there are common exclusions: damage from flooding (which requires separate flood insurance), damage caused by power surges through utility lines (which some policies exclude unless you can prove lightning as the cause), and pre-existing conditions that the storm exposed but did not cause. Having a professional electrical assessment documenting storm-specific causation strengthens your claim.

Keep all receipts, invoices, and permits related to the repair. Your electrician's permit number and inspection records provide official documentation that the repairs were performed to code — this can be valuable if your insurance company questions the scope or cost of repairs.